How do you sell scrap metal for the first time?
Selling scrap metal for the first time is simple. Sort your metal into ferrous and non-ferrous piles, pull out any obvious non-metal junk, and bring a government-issued photo ID. At Metro Metals, we’ll weigh and identify your material, you unload, and we pay you based on metal type and weight.
It’s just five steps. Call it the Scrap-Ready Checklist:
Magnet test everything and split it into two piles.
Put the high-value non-ferrous metals (copper, brass, aluminum) into their own bins.
Strip off the easy stuff: plastic, wood, rubber, dirt.
Grab your photo ID and call the yard to confirm what they take.
Weigh in, unload, and get paid.
That's really it. The rest of this post is the detail behind each step.
Ferrous vs. non-ferrous: Start with a magnet
Every scrap metal sale starts with one question: does a magnet stick to it?
If it sticks, it's ferrous, meaning it contains iron. Steel, cast iron, and most appliances are in this category. If the magnet slides off, it's non-ferrous. That's your copper, brass, aluminum, and most stainless steel.
The difference matters because non-ferrous metal pays a lot more per pound. Ferrous scrap is heavy and common, so its value comes from volume.
And honestly, the cheap magnet stuck to your fridge is the most useful scrap tool you own. See if it sticks to your metal before you load a single thing.
What types of scrap metal are worth selling?
Copper, brass, and clean aluminum are the scrap metals most worth selling for the average homeowner. Stainless steel is a solid fourth. Ordinary steel and iron are worth hauling mainly when you have a big, heavy load.
Here's roughly how common household scrap stacks up, from most to least valuable per pound:
● Copper wire and pipe, especially clean pipe with no fittings attached
● Brass from faucets, valves, and plumbing fixtures
● Aluminum: gutters, window frames, lawn furniture, wheels
● Stainless steel from sinks, appliances, and restaurant equipment
● Steel and cast iron, like old grills, bed frames, and shelving
Then there's e-waste. Old computers and electronics aren't loose scrap, and they need proper handling. That's why we run a separate electronics recycling service rather than treating them like a pile of steel.
Our take: if you're short on time, focus on the non-ferrous metals. A bucket of copper fittings can be worth more than a truck bed of old shelving, and it's a lot easier to lift.
How to prep scrap metal without wasting a Saturday
The common advice is to clean and strip everything down to bare metal before you sell. In practice, that's often a bad trade for homeowners.
Some prep is worth it. Pulling a plastic handle off an aluminum door takes ten seconds. Knocking the dirt and wood off a steel load takes a few minutes. Sorting copper away from everything else is the single biggest thing you can do, since mixed loads tend to get priced at the lowest common value.
Stripping insulated copper wire is a different story. Yes, bare copper pays more than insulated wire. But unless you've got a serious amount of it, the hours you'll spend with a stripping tool usually aren't worth the difference. Sell it insulated and get your afternoon back.
One hard rule: never burn wire to remove insulation. It releases toxic fumes, and in Washington, scrap businesses can't buy burned wire unless the seller provides written proof it was burned legally.
Say you're clearing out after a bathroom remodel. You've got copper supply lines, a brass faucet, a steel tub, and some aluminum trim. Put the copper and brass into one bucket, the aluminum in another, and leave the tub as-is. That's 15 minutes of sorting, and it gets the most value out of the load.
What to bring when selling scrap at a yard
Bring a current government-issued photo ID, like a driver's license or state ID card. Both Oregon and Washington have metal theft laws, so yards record every non-ferrous transaction and have to follow specific payment rules. Expect some light paperwork and possibly a short wait for your money.
How you get paid depends on what you're selling and which side of the river you're on.
Oregon
Oregon bans cash payments for non-ferrous metal. Individual sellers are paid by check, and that check can't go out until at least three business days after the sale. Under Oregon's rules, only Monday through Friday count as business days, even if the yard is open on the weekend.
Oregon also has a Metal Transportation Certificate law for commercial metal hauling. Check the Oregon State Police guidance before you load up.
Washington
In Washington, yards can't buy non-ferrous metal from anyone who can't show at least one current government-issued photo ID. Cash for non-ferrous metal is capped at $30, and the rest is paid by nontransferable check or electronic payment, depending on what the yard records at the time of sale. Washington lawmakers have been revising these rules, so it's smart to call ahead for the current process.
Ferrous metal, like that old steel tub, generally isn't held to the same strict non-ferrous payment rules in either state.
So bring your ID. Bring a street address where you can receive mail. And wear closed-toe shoes, because an active scrap yard is no place for sandals.
Selling scrap metal as a contractor or business
Contractors and businesses usually sell scrap metal through a commercial account, with containers or scheduled pickups instead of loading a pickup truck every week. It saves time on the job site and keeps scrap from piling up between trips.
This is where we spend a lot of our energy at Metro Metals. Our on-site scrap metal pickup and transportation and logistics teams handle the hauling, so fabricators, manufacturers, and contractors don't have to. We run our own trucks, our own shredders, and our own processing in-house. Our co-founders, Victor Winkler and Steve Zusman, built the company that way back in 1991, and it's still how we can keep pricing competitive.
We also care a lot about getting the grade right. Using our testing and detection equipment, we identify and sort your metal, so you get paid for what you actually bring in. For a shop with a steady stream of mixed alloys, that accuracy adds up fast. Companies can learn more on our industrial metals recycling page.
Your scrap doesn't stop at our yard either. According to ReMA's Yearbook, U.S. recyclers processed 135 million metric tons of recycled material in a year, including 65 million tons of iron and steel and 9 million tons of non-ferrous metals. More than three quarters of it was sold to manufacturers here in the U.S. Metro Metals is proud to be ranked as one the nation’s top 20 recyclers of ferrous material by Recycling Today.
Ready to sell?
You don't need a perfect setup to get started. A magnet, a couple of buckets, and your ID will cover most first-time loads. If you have questions about a specific material, give us a call before you make the drive.
Find the Metro Metals location nearest you to get paid for your metal scrap. We'll take it from there.
Frequently Asked Questions
How to sell scrap metal for the first time?
Start with a magnet. If it sticks, it’s ferrous. If it doesn’t, it’s non-ferrous, and that usually pays more. Pull out plastic, wood, and dirt, then bring a government-issued photo ID to a licensed scrap yard. At Metro Metals, we weigh and identify your load before paying you. Not sure we take something? Call ahead and ask.
What types of scrap metal are worth selling?
Copper is usually the most valuable common scrap metal, followed by brass, clean aluminum, and stainless steel. These non-ferrous metals pay much more per pound than steel or iron. Steel and cast iron are still worth selling, but mostly in larger, heavier loads. Keeping each metal type separated generally gets you a better price.
What do I need to bring when selling scrap at a yard?
Bring a current government-issued photo ID, such as a driver's license, plus a street address where you can receive mail. In Oregon, non-ferrous payments are mailed by check at least three business days after the sale. Washington has its own ID and payment rules. Closed-toe shoes are a good idea too.
Where can contractors sell leftover metal from job sites?
Contractors can sell job site scrap to a licensed scrap yard by dropping it off or setting up a commercial account. For steady volume, a lot of yards offer containers and scheduled pickups. Metro Metals handles on-site collection and in-house trucking from our Portland, Vancouver, Tacoma, and Denver locations, so your crew doesn’t have to haul it.
{
"@context": "https://schema.org",
"@type": "FAQPage",
"mainEntity": [
{
"@type": "Question",
"name": "How to sell scrap metal for the first time?",
"acceptedAnswer": {
"@type": "Answer",
"text": "Start by sorting your metal with a magnet: magnetic pieces are ferrous, everything else is non-ferrous and usually worth more. Remove obvious plastic, wood, and dirt. Bring a government-issued photo ID to a licensed scrap yard, where your load is weighed and identified before you're paid. Calling ahead helps you confirm accepted materials."
}
},
{
"@type": "Question",
"name": "What types of scrap metal are worth selling?",
"acceptedAnswer": {
"@type": "Answer",
"text": "Copper is usually the most valuable common scrap metal, followed by brass, clean aluminum, and stainless steel. These non-ferrous metals pay much more per pound than steel or iron. Steel and cast iron are still worth selling, but mostly in larger, heavier loads. Keeping each metal type separated generally gets you a better price."
}
},
{
"@type": "Question",
"name": "What do I need to bring when selling scrap at a yard?",
"acceptedAnswer": {
"@type": "Answer",
"text": "Bring a current government-issued photo ID, such as a driver's license, plus a street address where you can receive mail. In Oregon, non-ferrous payments are mailed by check at least three business days after the sale. Washington has its own ID and payment rules. Closed-toe shoes are a good idea too."
}
},
{
"@type": "Question",
"name": "Where can contractors sell leftover metal from job sites?",
"acceptedAnswer": {
"@type": "Answer",
"text": "Contractors can sell job site scrap to a licensed scrap yard, either by dropping it off or by setting up a commercial account. Many yards offer containers and scheduled pickups for steady volume. Metro Metals provides on-site collection and in-house trucking across Portland and Southwest Washington, so crews don't have to haul scrap themselves."
}
}
]
}